FAG bearings in addition to other excellent quality, but also the parts are very precise, both high-performance bearings, if used improperly in the course, not only to achieve desired performance results, and very easy to damage the bearing, we are definitely in the lubrication have noticed. In addition to lubrication outside, FAG bearings in use, there are those who need attention?
First, use the installation to be carefully
Does not allow powerful punch, does not allow a direct hit with a hammer bearing, does not allow to pass through the rolling pressure.
Second, the use of appropriate, accurate installation tool
To make use of special tools, try to avoid using the cloth and staple fibers and the like.
Third, try to keep FAG bearing and its surroundings clean
Smile even if invisible dust into the bearing, will increase bearing wear, vibration and noise.
Fourth, to prevent corrosion of bearings FAG
FAG bearing direct hand pick, to fully wash hands sweat, and then coated with high-quality mineral oil to operate in the rainy season and summer with particular attention to rust.
In certain special operating conditions, FAG bearings can get a longer life in traditional computing, especially in light load conditions. These special operating conditions is that, when the rolling surface (track and rolling pieces) is an effective lubricant film separating and limit pollutants may cause destruction of the surface. In fact, in ideal conditions, so-called permanent FAG bearing life is possible.
FAG bearing overhaul under demolition, the first recorded appearance of the bearing, to confirm the remaining amount of lubricant, the lubricant used after sampling inspection, wash bearings. As a cleaning agent, general use gasoline, kerosene.
Removed to the FAG bearings cleaning, cleaning and fine cleaning sub thick, were placed in the container, first put the metal bottom of the net, so no direct contact with the container bearing the dirt. Rough cleaning, if the dirt with a rotating bearing, rolling bearing damage the surface, it should be noted. In the crude oil washing, use a brush to remove grease, adhesive material, generally clean, into the fine cleaning.
Sperm washing is to clean the oil bearing in the side of rotation, while careful cleaning. In addition, cleaning the oil must be kept clean.
Bearing maintenance and to judge: To determine whether the demolition can be used down the bearings, FAG bearings to clean after the inspection. Check the raceway, the raceway, with the state of the surface, cage wear, bearing clearance and the increase in dimensional accuracy has nothing to do down the damage, abnormal. Non-separation-type small ball bearings, the inner ring with one hand to the level of support, rotating the outer ring to confirm smooth.
Tapered roller bearings and other separation-shaped bearings, you can scroll through the body, the outer ring raceway surface were examined.